Lined Pipe & Fittings

Urethane Lined Pipe

Towniprene® fabricated and lined piping systems are available from 4 inch to 60 inch ID’s up to 25 feet in length with lining thickness from 1/4 inch to 2 inches depending on the requirements of the application. Towniprene® is excellent in fine feed applications up to 165°F and has found widespread use throughout industry. The lining and gaskets are continuous over the flange through the use of cores or centrifugal lining and are chemically bonded to the pipe with release agents on the metal substrate .

Whether a new build or a re-line, our craftsmen use the same rigorous process to provide you with the best quality lined pipe in the industry. From fabrication of the pipe to your specifications to surface preparation, these industrial-grade lined pipes withstand abrasive and corrosive slurries in suction or discharge service.

The lining is typically supplied in our premium polyurethane formulation. The pipe is molded or spun to the proper ID, then through-cured in our temperature controlled ovens to ensure complete cure.

  • Most standard pipe dimensions
  • Typical pipe flange selection
  • Straight pipe and reducers
  • Elbows, wyes, tees
  • Headers & Laterals
  • Lining thicknesses to match ID’s of existing pipe lining

Towniprene® is great for sliding abrasion or corrosive media found in chemical, mineral beneficiation, metallurgical coal prep, sand and gravel, clay, kaolin and limestone preparation.